Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Solid specific gravity | | ASTM D-792 | 1.05 |
| Mold shrinkage rate | | ASTM D-955 | 4-6 in/inE-3 |
| Basic performance | Test Condition | Test Method | Test Result |
|---|
| melt mass-flow rate | | ASTM D-1238 | 4.4 g/10min |
| melt mass-flow rate | | ISO 1133 | 16 g/10min |
| melt viscosity | | ASTM D-3825 | 2550 poise |
| Other performance | Test Condition | Test Method | Test Result |
|---|
| Rated HB value | | UL 94 | 0.060 inch |
| Comparative Tracking Index | | UL 746A | 1 PLC Code |
| | UL 746A | 3 PLC Code |
| Tungsten resistance | | ASTM D-495 | 6 PLC Code |
| High Ampere Arc Igniter, Surface | | UL 746A | 3 PLC Code |
| UL file number | | | E121562 |
| High voltage bow orbit rate | | UL 746A | 3 PLC Code |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Flexural modulus | | ASTM D-790 | 355000 psi |
| tensile yield strength | | ASTM D-638 | 6150 psi |
| tensile elongation at break | | ASTM D-638 | 30.0 % |
| tensile breaking strength | | ASTM D-638 | 4900 psi |
| IZOD notch impact strength | | ASTM D-256 | 6.5 ft-lb/in |
| Tensile yield elongation | | ASTM D-638 | 2.2 % |
| Tensile modulus | | ASTM D-638 | 345000 psi |
| | ASTM D-790 | 10600 psi |
| Instrumented impact | | ASTM D-3763 | 304 in-lbs |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| CTE | | ASTM E-831 | 4.1E-05 1/F |
| CTE | | ASTM E-831 | 4.3E-05 1/F |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ASTM D-648 | 185 deg F |
| vicat | | ASTM D-1525 | 214 deg F |
| Heat index | | UL 746B | 60 deg C |
| Heat index | | UL 746B | 60 deg C |
| Heat index | | UL 746B | 60 deg C |
| | ASTM D-648 | 210 deg F |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices