Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ISO1183 | 1.37 g/cm³ |
| Water absorption rate | | ISO62 | 6.5 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | | ISO2039-2 | 105 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| Limiting Oxygen Index | | ISO4589-2 | 24 % |
| UL flame retardant rating | | UL94 | HB |
| Burning wire flammability index | | IEC60695-2-12 | 650 °C |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ISO180/1A | 4.0 kJ/m² |
| Impact strength of simply supported beam without notch | | ISO179/1eU | 50 kJ/m² |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ISO527-2/1 | 7500 MPa |
| Tensile stress | Break | ISO527-2/5 | 80.0 MPa |
| Tensile strain | Break | ISO527-2/5 | 2.0 % |
| Flexural modulus | | ISO178 | 7000 MPa |
| Bending stress | | ISO178 | 125 MPa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| CTI | | IEC60112 | 350 V |
| CTI | | IEC60112 | 425 V |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| vicat | | ISO306/B120 | 222 °C |
| | ISO11359-2 | 4E-05 cm/cm/°C |
| | ISO11359-2 | 5E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare