
PC 3025M15 BK SAMYANG KOREA
73
Form:Granules | Grade:Injection grade
Properties:
Dimensional stabilityHigh impact resistanceFlame retardant Wear resistance
Typical Applications:
Automotive ApplicationsOffice supplies
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Automotive Applications | Office supplies |
| Properties: | Dimensional stability | High impact resistance | Flame retardant | Wear resistance |
Certificates
No Data...
Technical Data Sheet
| Basic Performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Water absorption rate | ASTM D-495 | 0.12 | % | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Bending modulus | ASTM D-790 | 22000 | kg/cm | |
| Rockwell hardness | ASTM D-785 | 123 | R scale | |
| elongation | Break | ASTM D-638 | 100 | % |
| tensile strength | ASTM D-638 | 600 | kg/cm | |
| Impact strength of cantilever beam gap | 1/8"英寸 | ASTM D-256 | 15 | kg·cm/cm |
| bending strength | ASTM D-790 | 850 | kg/cm | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Hot deformation temperature | 18.6kg/cm | ASTM D-648 | 133 | °C |
| Linear coefficient of thermal expansion | ASTM D-696 | 5.6×10 | mm/mm/℃ | |
| Hot deformation temperature | 4.6kg/cm | ASTM D-648 | 144 | °C |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Shrinkage rate | 3mmt | ASTM D-955 | 0.5-0.7 | % |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Arc resistance | ASTM D-495 | 120 | sec | |
| Dielectric strength | ASTM D-149 | 30 | KV/mm | |
| Volume resistivity | 10 | ASTM D-257 | 4 | Ω.cm |
| Dissipation factor | 10 | ASTM D-150 | 0.0092 | |
| Conductivity | 10 | ASTM D-150 | 2.85 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.