PA66 A218V20 SOLVAY FRANCE

Form：Granules | Grade：Injection grade

Properties:

Filler: Glass fiber reinf20% filler by weight

Typical Applications:

Application in the automotive fieldcontainer

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Application in the automotive field \| container
Properties:	Filler: Glass fiber reinf \| 20% filler by weight

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	50	kJ/m²
flammability	Test Condition	Test Method	Test Result	Test Unit
Burning wire flammability index	1.6mm	IEC 60695-2-12	650	°C
Extreme Oxygen Index		ISO 4589-2	23	%
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus	23°C	ISO 527-2/1A	7400	Mpa
tensile strength	Break,23°C	ISO 527-2/1A	150	Mpa
Tensile strain	Break,23°C	ISO 527-2	3.3	%
Bending modulus	23°C	ISO 178	6400	Mpa
bending strength	23°C	ISO 178	235	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/Af	250	°C
Melting temperature		ISO 11357-3	262	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	23°C,24hr	ISO 62	1.0	%
	Water absorption rate	Saturation,23°C	ISO 62	6.6	%
	Water absorption rate	Water absorption rate	Equilibrium,23°C,50%RH	ISO 62	2.4	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Surface resistivity		IEC 60093	6E+15	ohms
Volume resistivity		IEC 60093	1E+15	ohms·cm
Dielectric strength	2.00mm	IEC 60243-1	32	KV/mm
Relative permittivity		IEC 60250	3.70
Dissipation factor		IEC 60250	0.010
Compared to the anti leakage trace index	SolutionA	IEC 60112	PLC 1

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top