PP AY564 TPC SINGAPORE

Form：Granules | Grade：Injection grade

Properties:

Impact copolymerHigh mobilityHigh rigidityHigh impact resistance

Typical Applications:

Thin-walled containerHome appliance componentsElectronic fieldElectrical fieldToyLoading box

Supplier(1)

Product Description

Certificates(1)

Datasheet

Product Description

Typical Applications:	Thin-walled container \| Home appliance components \| Electronic field \| Electrical field \| Toy \| Loading box
Properties:	Impact copolymer \| High mobility \| High rigidity \| High impact resistance

Certificates

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap	23°C	ASTM D256	80	J/m
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	-20°C	ASTM D256	42	J/m
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating		UL 94	HB
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Bending modulus		ASTM D790	1320	Mpa
elongation	Break	ASTM D638	200	%
tensile strength	Break	ASTM D638	20.0	Mpa
tensile strength	tensile strength	Yield	ASTM D638	28.0	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45MPa,Unannealed	ASTM D648	124	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate		ASTM D1238	16	g/10min
density		ASTM D792	0.900	g/cm³
Shrinkage rate	TD:2.00mm	Internal Method	1.7	%
Shrinkage rate	Shrinkage rate	MD:2.00mm	Internal Method	1.6	%
hardness	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness	R-Scale	ASTM D785	92

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top