PA6 Ultramid® B3S(粉)
51
- Properties:crystallizationHigh mobilityFast forming cycleOil resistant
- Usages:Thin walled componentspartsShell
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO1183 | 1.13 g/cm³ | |
| Melt volume flow rate | ISO1133 | 175 cm3/10min | |
| Water absorption rate | ISO62 | 9.5 % | |
| ISO62 | 3.0 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO179 | 4.0 kJ/m² | |
| Impact strength of simply supported beam without notch | ISO179 | 200 kJ/m² | |
| ISO179 | 250 kJ/m² | ||
| Impact strength of cantilever beam gap | ISO180 | 3.0 kJ/m² | |
| Charpy Notched Impact Strength | ISO179 | 3.0 kJ/m² |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ISO527-2 | 3400 Mpa | |
| Tensile stress | ISO527-2 | 88.0 Mpa | |
| Tensile strain | ISO527-2 | 3.8 % | |
| Nominal tensile fracture strain | ISO527-2 | 10 % | |
| Flexural modulus | ISO178 | 2900 Mpa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ISO75-2/A | 65.0 °C | ||
| ISO3146 | 220 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top