PC/ABS CYCOLOY™ C7230P-701 SABIC INNOVATIVE THAILAND

Properties:
Aging resistance
High mobility
Usages:
Electronic and electrical accessories
Casters
Household appliances
Compare

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result
moisture absorption		23°C / 50% RH; ISO 62	0.04 %
Saturated water absorption rate		ISO 62	0.09 %
Linear molding shrinkage rate, Flow		SABIC method	0.0025 - 0.0035 cm/cm
melt mass-flow rate		ASTM D1238	13
melt mass-flow rate	melt mass-flow rate		ASTM D1238	@Load 2.16 kg, Temperature 260
Compound melt index		MVR [cm^3/10 min]; ISO 1133	49.0 µm/m-°C g/10 min
Compound melt index	Compound melt index			@Load 2.16 kg, Temperature 260

Mechanical properties	Test Condition	Test Method	Test Result
Tensile strength (yield)		ISO 178	35 Mpa
	Tensile strength (yield)		Type I, 50 mm/min; ASTM D638	45 Mpa
		Tensile strength (yield)		ISO 178	55 Mpa
		Tensile strength (yield)	Tensile strength (yield)		Type I, 50 mm/min; ASTM D638	58 Mpa
Elongation (fracture)		ISO 178	30 %
Elongation (fracture)	Elongation (fracture)		Type I, 50 mm/min; ASTM D638	32 %
elongation at yield		ISO 178	3.8 %
elongation at yield	elongation at yield		Type I, 50 mm/min; ASTM D638	4 %
Tensile modulus		GB/T 15585-1995	5.2
Tensile modulus	Tensile modulus		1 mm/min; ISO 527	5.58
bending strength		1.3 mm/min, 50 mm span; ASTM D790	98 Mpa
bending strength	bending strength		2 mm/min; ISO 178	99 Mpa
Flexural modulus		1.3 mm/min, 50 mm span; ASTM D790	4.53
Flexural modulus	Flexural modulus		2 mm/min; ISO 178	4.58
Impact strength of cantilever beam gap		ASTM D256	0.69 J/cm
	Impact strength of cantilever beam gap		ASTM D256	0.55 J/cm
		Impact strength of cantilever beam gap			@Temperature -30.0
		Impact strength of cantilever beam gap	Impact strength of cantilever beam gap		80104; ISO 180/1A	5 kJ/m²
Charpy Notched Impact Strength		Edgew 80104 sp=62mm; ISO 179/1eA	0.5 J/cm²

Thermal performance	Test Condition	Test Method	Test Result
Coefficient of Linear Thermal Expansion (Flow)		GB 1040	42 µm/m-°C
Coefficient of Linear Thermal Expansion (Flow)	Coefficient of Linear Thermal Expansion (Flow)		ISO 11359-2	42 µm/m-°C
Linear coefficient of thermal expansion, lateral flow		GB 1040	49 µm/m-°C
Linear coefficient of thermal expansion, lateral flow	Linear coefficient of thermal expansion, lateral flow		ISO 11359-2	59 µm/m-°C
Thermal deformation temperature under load (1.8 MPa)		Flatw 80104 sp=64mm; ISO 75/Af	89
Thermal deformation temperature under load (1.8 MPa)	Thermal deformation temperature under load (1.8 MPa)		ASTMF1249	88
vicat		Rate B/50; ISO 306	107
	vicat		Rate B/50; ASTM D1525	108
	vicat	vicat		Equate	110
Flammability (UL94)		UL 94	V-0

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top