Share
Add to compare

PC TRISTAR® PC-10R-CL(V22) PTS USA

Typical Applications:
Electrical and electronic applications communication equipment
Product Description
Certificates(0)
Datasheet

Product Description

Typical Applications:Electrical and electronic applications | communication equipment

Certificates

No Data...

Technical Data Sheet

optical performanceTest ConditionTest MethodTest ResultTest Unit
turbidityASTM D10031.0%
Refractive indexASTM D5421.586
transmissivityASTM D100389.0%
impact performanceTest ConditionTest MethodTest ResultTest Unit
Impact strength of cantilever beam gap3.17mmASTM D256850J/m
flammabilityTest ConditionTest MethodTest ResultTest Unit
UL flame retardant rating1.50mmUL 94V-2
Burning wire flammability indexIEC 60695-2-12960°C
Hot filament ignition temperatureIEC 60695-2-13775°C
mechanical propertiesTest ConditionTest MethodTest ResultTest Unit
tensile strengthYield,3.17mmASTM D63862.1MPa
elongationBreak,3.17mmASTM D1708150%
Bending modulus3.17mmASTM D7902410MPa
bending strengthYield,3.17mmASTM D79096.5MPa
thermal performanceTest ConditionTest MethodTest ResultTest Unit
Linear coefficient of thermal expansionMD:-40to95°CASTME8317E-05cm/cm/°C
Linear coefficient of thermal expansionTD:-40to95°CASTME8316.8E-05cm/cm/°C
RTI ElecUL 746125°C
RTI ImpUL 746115°C
RTIUL 746125°C
Physical propertiesTest ConditionTest MethodTest ResultTest Unit
densityASTM D7921.20g/cm³
melt mass-flow rate300°C/1.2kgASTM D123810g/10min
Water absorption rate23°C,24hrASTM D5700.15%
Electrical performanceTest ConditionTest MethodTest ResultTest Unit
Arc resistanceASTM D495PLC6
Compared to the anti leakage trace indexCTIUL 746PLC 2
High arc combustion index1.50mmUL 746PLC 0
High arc combustion index3.00mmUL 746PLC 1
High voltage arc tracing rateHVTRUL 746PLC 3
Hot wire ignition1.50mmUL 746PLC 3
Hot wire ignition3.00mmUL 746PLC 2
hardnessTest ConditionTest MethodTest ResultTest Unit
Rockwell hardnessR-ScaleASTM D785118
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.