PLA Ingeo™ 7001D
68
- Properties:compostableUpdatable resourcesFood contact compliance
- Usages:bottle
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ASTM D1238 | 6.0 g/10min | |
| Shrinkage rate | 0.30-0.50 % | ||
| melt mass-flow rate | ASTM D1238 | 5.0 to 85 g/10 min | |
| Shrinkage rate | ASTM D2102 | 0.30 - 0.50 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D2256 | 16 J/m |
| film | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Carbon dioxide transmittance | 内部方法 | 2850 cm³/m²/24hr | |
| OTr | ASTM D1434 | 680 cm³/m²/24hr | |
| Water Vapor Transmission Rate | ASTMF1249 | 380 g/m²/24hr |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Glass Transition Temperature | ASTM D3418 | 55.0to60.0 °C | |
| Crystallization peak temperature | ASTM D3418 | 145to160 °C | |
| Glass Transition Temperature | ASTM D3418 | 51.7 to 57.8 °C | |
| Crystallization peak temperature | ASTM D3418 | 146 to 154 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top