Share
Add to Compare

ABS CL-301 DENKA JAPAN

25

Form:Granules | Grade:Injection grade

Properties:
transparent
Product Description
Certificates(0)
Datasheet

Product Description

Properties:transparent

Certificates

No Data...

Technical Data Sheet

Basic PerformanceTest ConditionTest MethodTest ResultTest Unit
melt mass-flow rate200℃×5kgJIS K-68742.0g/10min
melt mass-flow rate220℃×10kgJIS K-687426g/10min
mechanical propertiesTest ConditionTest MethodTest ResultTest Unit
tensile strengthASTM D-63834Mpa
Impact strength of cantilever beam gap1/4〃ASTM D-256164J/m
bending strengthASTM D-79062Mpa
Bending modulusASTM D-7901860Mpa
Rockwell hardnessASTM D-78536M
tensile strengthASTM D638/ISO 52734kg/cm²(MPa)[Lb/in²]
Rockwell hardnessASTM D78536
Bending modulusASTM D790/ISO 1781860kg/cm²(MPa)[Lb/in²]
bending strengthASTM D790/ISO 17862kg/cm²(MPa)[Lb/in²]
Impact strength of cantilever beam gapASTM D256/ISO 179164kg·cm/cm(J/M)ft·lb/in
thermal performanceTest ConditionTest MethodTest ResultTest Unit
Vicat softening temperature5kgJIS K-720682°C
Hot deformation temperature6.4mm 1.82MPaASTM D-64873°C
Hot deformation temperatureHDTASTM D648/ISO 7573℃(℉)
Vicat softening temperatureASTM D1525/ISO R30682℃(℉)
Physical propertiesTest ConditionTest MethodTest ResultTest Unit
Shrinkage rate2mmt0.3-0.5%
turbidity2mmtASTM D-10031.7%
Total Light Transmittance2mmtASTM D-100390%
Combustibility垂直燃烧性UL -941.5mmHB
densityASTM D792/ISO 11831.10
Shrinkage rateASTM D9553-5%
melt mass-flow rateASTM D1238/ISO 11332.0g/10min
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.