POM HOSTAFORM® S27076
31
- Properties:Chemical resistanceantioxidantHydrolysis resistance
- Usages:Bottle capElectrical applications
Compare
View PricesTechnical Data Sheet
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Water absorption rate | ISO 62 | 0.3 % | |
| ISO 62 | 0.8 % | ||
| melt mass-flow rate | ISO 1133 | 20.64 g/10min | |
| density | ISO 1183 | 1.29 g/cm |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile creep modulus | ISO 899 part 1 | 400 Mpa | |
| ball indentation hardness | ISO 2039 part 1 | 35 Mpa | |
| Tensile modulus | ISO 527 part 1/2 | 900 Mpa | |
| Flexural modulus | ISO 178 | 800 Mpa | |
| Charpy notch impact strength | ISO 179 1eA | 0.9 J/cm | |
| ISO 179 1eA | 1.20 J/cm | ||
| permeability | ISO 6603, part 2 | 15 mm | |
| Tensile creep modulus | ISO 899 part 1 | 700 Mpa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| dielectric constant | IEC 60250 | 5.30 | |
| IEC 60250 | 5.30 | ||
| Dielectric Strength | IEC 60243 part 1 | 28 KV/mm | |
| Dissipation Factor | IEC 60250 | 250 | |
| IEC 60250 | 300 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ISO 11359 part 1/2 | 120 µm/m-℃ | ||
| ISO 75 part 1/2 | 55 °C | ||
| vicat | ISO 306 | 60 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top