PA66 FR95G25V0NH NC010 DUPONT BELGIUM

Form：Granules | Grade：High liquidity level

Properties:

Flame retardantFiller: Glass fiber reinf25% filler by weight

Typical Applications:

Automotive ApplicationsElectrical applicationscurrencyIndustrial applications

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Automotive Applications \| Electrical applications \| currency \| Industrial applications
Properties:	Flame retardant \| Filler: Glass fiber reinf \| 25% filler by weight

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	35	kJ/m²
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	0.75mm	IEC 60695-11-10,-20	V-0
	UL flame retardant rating	1.5mm	IEC 60695-11-10,-20	V-0
		UL flame retardant rating	1.5mm	UL 94	V-0
		UL flame retardant rating	UL flame retardant rating	0.75mm	UL 94	V-0
Burning rate	1.00mm	ISO 3795	<100	mm/min
Extreme Oxygen Index		ISO 4589-2	32	%
FMVSS flammability		FMVSS302	B
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
bending strength		ISO 178	185	Mpa
Bending modulus		ISO 178	9000	Mpa
Tensile strain	Break	ISO 527-2	2.2	%
tensile strength	Break	ISO 527-2	109	Mpa
Tensile modulus		ISO 527-2	8900	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
TemperatureIndex	TensileStrength,5000hr	IEC 60216	190	°C
TemperatureIndex	TemperatureIndex	TensileStrength,20000hr	IEC 60216	160	°C
RTI Elec	3.0mm	UL 746	160	°C
	RTI Elec	1.5mm	UL 746	160	°C
		RTI Elec	0.75mm	UL 746	160	°C
		RTI Elec	RTI Elec	0.40mm	UL 746	160	°C
Melting temperature		ISO 11357-3	267	°C
Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/A	233	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Top out temperature			210	°C
Shrinkage rate	TD	ISO 294-4	0.60	%
Water absorption rate	Saturation,23°C,2.00mm	ISO 62	4.0	%
Shrinkage rate	MD	ISO 294-4	0.10	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Compared to the anti leakage trace index		IEC 60112	PLC 0
Dielectric strength		IEC 60243-1	37	KV/mm
Volume resistivity		IEC 60093	>1.0E+15	ohms·cm
Surface resistivity		IEC 60093	--	ohms

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top