PP Tecnoprene® FK5D NAT003 SO.F.TER ITALY

Properties:

Filler glass fiber reinforced material 25% filler by weight

Product Description

Certificates(0)

Datasheet

Product Description

Properties:

Filler | glass fiber reinforced material | 25% | filler by weight

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap	23°C	ASTM D256	120	J/m
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	3.2mm	UL 94	HB
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength	Break	ASTM D638	85.0	MPa
Bending modulus		ASTM D790	5500	MPa
bending strength		ASTM D790	130	MPa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Vicat softening temperature		ASTM D15253	132	°C
Hot deformation temperature	1.8MPa,Unannealed	ASTM D648	147	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ASTM D792	1.09	g/cm³
melt mass-flow rate	230°C/2.16kg	ASTM D1238	6.0	g/10min
Shrinkage rate		Internal Method	0.60	%
Water absorption rate	23°C,24hr	ASTM D570	0.020	%
ash content		Internal Method	26	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Surface resistivity		ASTM D257	1E+15	ohms
Dielectric constant	1kHz	ASTM D150	2.50
Compared to the anti leakage trace index		IEC 60112	PLC 0

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top