PPS BR42B-NC CPCHEM SINGAPHORE

Form：Granules | Grade：Injection grade

Properties:

High temperature resistanFlame retardantGlass fiber reinforcedenhancewear resistantFiller: Glass fiber reinf40% filler by weight

Typical Applications:

Fitness equipmentHousehold appliancesElectrical/Electronic Applications

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Fitness equipment \| Household appliances \| Electrical/Electronic Applications
Properties:	High temperature resistan \| Flame retardant \| Glass fiber reinforced \| enhance \| wear resistant \| Filler: Glass fiber reinf \| 40% filler by weight

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Suspended wall beam without notch impact strength	3.18mm	ASTM D4812	750	J/m
Suspended wall beam without notch impact strength	Suspended wall beam without notch impact strength		ISO 180	40	kJ/m²
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	1.6mm	UL 94	V-0
Extreme Oxygen Index		ASTM D2863	48	%
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength		ASTM D638	186	Mpa
tensile strength	tensile strength		ISO 527-2	190	Mpa
elongation	Break	ASTM D638	1.6	%
Tensile strain	Break	ISO 527-2	1.6	%
Bending modulus		ASTM D790	14500	Mpa
Bending modulus	Bending modulus		ISO 178	14000	Mpa
bending strength		ASTM D790	269	Mpa
bending strength	bending strength		ISO 178	280	Mpa
compressive strength		ASTM D695	255	Mpa
Poisson's ratio			0.40
Friction coefficient	vs.Steel-Dynamic	ASTM D3702	0.32
Wear factor		ASTM D3702	1.6E-06	m/hr
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	1.8MPa,Unannealed	ASTM D648	265	°C
Linear coefficient of thermal expansion	MD：-50to50°C	ASTME831	1.5E-05	cm/cm/°C
	Linear coefficient of thermal expansion	MD：100to200°C	ASTME831	1E-05	cm/cm/°C
		Linear coefficient of thermal expansion	TD：-50to50°C	ASTME831	4E-05	cm/cm/°C
			Linear coefficient of thermal expansion	TD：100to200°C	ASTME831	8E-05	cm/cm/°C
			Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	TD：导热系数	ASTME831	0.33	W/m/K
UL temperature rating		UL 746B	180	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate	MD：3.20mm		0.20	%
Shrinkage rate	Shrinkage rate	TD：3.20mm		0.50	%
Water absorption rate	23°C,24hr	ASTM D570	0.020	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Surface resistivity		ASTM D257	1E+16	ohms
Volume resistivity		ASTM D257	1E+16	ohms·cm
Dielectric strength		ASTM D149	22	KV/mm
Dielectric constant	25°C,1kHz	ASTM D150	3.70
Dielectric constant	Dielectric constant	25°C,1MHz	ASTM D150	3.70
Dissipation factor	25°C,1kHz	ASTM D150	2E-03
Dissipation factor	Dissipation factor	25°C,1MHz	ASTM D150	3E-03
Compared to the anti leakage trace index	CTI	UL 746	PLC 4
insulation resistance	90°C		1E+11	ohms
hardness	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness	R-Sale	ASTM D785	117
Rockwell hardness	Rockwell hardness	M-Sale	ASTM D785	97

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top