
PP 3117 ANC1 HUIZHOU NPC
45
Form:Granules | Grade:Injection grade
Properties:
Low Specific GravityHigh rigidityheat-resistingHigh rigidityHeat resistanceLow Specific GravityHigh rigidityHeat resistanceLow Specific Gravity
Typical Applications:
Household appliancessmall home appliancesMicrowave cookerRequire food grade small household appliance shellMicrowave tablewareRequire food grade small household appliance shellMicrowave tableware.
Product Description
Certificates(0)
Datasheet
Alternative Model(4)
Product Description
| Typical Applications: | Household appliances | small home appliances | Microwave cooker | Require food grade small household appliance shell | Microwave tableware | Require food grade small household appliance shell | Microwave tableware. |
| Properties: | Low Specific Gravity | High rigidity | heat-resisting | High rigidity | Heat resistance | Low Specific Gravity | High rigidity | Heat resistance | Low Specific Gravity |
Certificates
No Data...
Technical Data Sheet
| Basic Performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| melt mass-flow rate | ASTM D-1238 | 10 | g/10min | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Impact strength of cantilever beam gap | ASTM D-256 | 3.0 | kg.cm/cm | |
| Bending modulus | ASTM D-790 | 20000 | kg/cm2 | |
| tensile strength | Yield | ASTM D-638 | 400 | kg/cm2 |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Hot deformation temperature | HDT | ASTM D-648 | 135 | °C |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| density | ASTM D-792 | 0.91 | - | |
| Shrinkage rate | ASTM | 1.2-1.8 | % | |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Dielectric strength | ASTM D-149 | 40 | KV/mm |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.