Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | | 1.85 g/cm³ |
| Tightening rate | | | 2.0到5.0 |
| Shrinkage rate | | | 0.20到0.40 % |
| Water absorption rate | | | 0.25 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Barcol Hardness | | | 65 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | V-0 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| compressive strength | | | 241 MPa |
| tensile strength | | | 82.7 MPa |
| Flexural modulus | | | 13800 MPa |
| bending strength | | | 103 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | | 27 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| dielectric constant | | | 3.90 |
| dielectric constant | | | 4.30 |
| Dissipation Factor | | | 0.012 |
| Dissipation Factor | | | 0.011 |
| Dissipation Factor | | | 180 sec |
| Dissipation Factor | | | 56000 V |
| dielectric strength | | | 14 kV/mm |
| Surface Resistivity | | | 1E+15 ohms |
| Volume resistivity | | | 1E+15 ohms·cm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Glass Transition Temperature | | | 175 °C |
| | | 2.5E-05 cm/cm/°C |
| | | 7E-05 cm/cm/°C |
| Linear coefficient of thermal expansion | | | 0.67 W/m/K |
| Linear coefficient of thermal expansion | | | 260 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare