Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ISO1183 | 1.21 g/cm³ |
| melt mass-flow rate | | ISO1133 | 1.7 g/10min |
| Water absorption rate | | ISO62 | 6.0 % |
| density | | ISO1183 | 1.21 g/cm³ |
| Melt volume flow rate | | ISO1133 | 1.70 cm³/10min |
| Water absorption rate | | ISO62 | 6.0 % |
| optical performance | Test Condition | Test Method | Test Result |
|---|
| refractive index | | ISO489 | 1.540 |
| transmissivity | | ISO13468-2 | 91.0 % |
| refractive index | | ISO489 | 1.540 |
| transmissivity | | ISO13468-2 | 91.0 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | HB |
| FireRating | | DIN4102 | B2 |
| FireRating | | DIN4102 | B2 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ISO527-2/1 | 4000 MPa |
| Tensile stress | Break | ISO527-2/5 | 80.0 MPa |
| Tensile strain | Break | ISO527-2/5 | 3.0 % |
| Tensile modulus | | ISO527-2/1 | 4000 MPa |
| Tensile stress | Break | ISO527-2/5 | 80.0 MPa |
| Tensile strain | Break | ISO527-2/5 | 3.0 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of simply supported beam without notch | | ISO179/1eU | 20 kJ/m² |
| Impact strength of simply supported beam without notch | | ISO179/1eU | 20 kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ISO75-2/B | 158 °C |
| | ISO75-2/A | 149 °C |
| vicat | | ISO306/B50 | 170 °C |
| | ISO75-2/B | 158 °C |
| | ISO75-2/A | 149 °C |
| vicat | | ISO306/B50 | 170 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare