PA12 LV-3H EMS-CHEMIE SWITZERLAND

Form：Granules | Grade：Injection grade

Properties:

Weather resistanceChemical resistancewear resistantdimensional stability Low temperature impact reGas barrierGlass fiber reinforced

Typical Applications:

Automotive sectorShellelectrical machineryElectrical fieldElectronic fieldchipmachineMechanical components

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Automotive sector \| Shell \| electrical machinery \| Electrical field \| Electronic field \| chip \| machine \| Mechanical components
Properties:	Weather resistance \| Chemical resistance \| wear resistant \| dimensional stability \| Low temperature impact re \| Gas barrier \| Glass fiber reinforced

Certificates

No Data...

Technical Data Sheet

Basic Performance	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	23℃/50%rh	ISO 62	0.6	%
Water absorption rate	Water absorption rate	23℃	ISO 62	1.1	%
density	dry	ISO 1183	1.22	dry
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus	1mm/min,cond	ISO 527	6000	Mpa
Impact strength of cantilever beam gap	Charpy,23℃,cond	ISO 179/2-1eA	20	KJ/m
tensile strength	5mm/min,cond，Break	ISO 527	105	Mpa
Shore hardness	cond	ISO 2039-1	77	Mpa
Impact strength of cantilever beam gap	Charpy,-30℃,cond	ISO 179/2-1eA	15	KJ/m
Elongation at Break	5mm/min,cond	ISO 527	8	%
Impact strength of cantilever beam gap	Charpy,23℃,cond	ISO 179/2-1eU	80	KJ/m
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	Charpy,-30℃,cond	ISO 179/2-1eU	80	KJ/m
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Maximum operating temperature	short term,dry	ISO 2578	150	°C
Linear coefficient of thermal expansion	23-55℃,dry	ISO 11359	0.2
Hot deformation temperature	8.00MPa,dry	ISO 75	160	°C
Maximum operating temperature	long term,dry	ISO 2578	90-120	°C
Linear coefficient of thermal expansion	23-55℃,dry(Across Flow)	ISO 11359	1.5
Hot deformation temperature	1.80MPa,dry	ISO 75	160	°C
Melting temperature	DSC,dry	ISO 11357	178	°C
UL flame retardant rating	0.8mm	ISO 1210	HB
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate	long,Across Flow	ISO 294	0.10	%
Shrinkage rate	Shrinkage rate	trans,Across Flow,dry	ISO 294	0.75	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Surface resistivity	cond	IEC 60093	10	Ω
Dielectric strength	dry,cond	IEC 60243-1	35	KV/mm
Arc resistance	cond	IEC 60112	600
Volume resistivity	dry,cond	IEC 60093	10	Ω.cm

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top