PA/PP HT RNP43MU04AL
0
- Properties:43%glass fiber reinforced materialhigh heat resistance
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | ASTM D-955 | 0.8 % | |
| density | ASTM D-792 | 1.38 g/cm³ | |
| melt mass-flow rate | ASTM D-1238 | 8.4 g/10 min | |
| Shrinkage rate | ASTM D-955 | 0.3 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile strength (yield) | ASTM D-638 | 143 MPa | |
| elongation at break | ASTM D-638 | 7.5 % | |
| Flexural modulus | ASTM D-790 | 945 MPa | |
| ASTM D-790 | 986 MPa | ||
| bending strength | ASTM D-790 | 203 MPa | |
| Impact strength of cantilever beam gap | ASTM D-256 | 110 J/m | |
| Suspended wall beam without notch impact strength | ASTM D-256 | 710 J/m | |
| Dart impact | ASTM D-5420 | 0.520 J |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D-648 | 242 ℃ | |
| ASTM D-648 | 257 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top