Technical Data Sheet
| hardness | Test Condition | Test Method | Test Result |
|---|
| | | 90 89 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | | V-0 -- |
| Hot filament ignition temperature | | °C | 960 -- |
| Limiting Oxygen Index | | % | 34 -- |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile stress | | MPa | 140 |
| Tensile strain | | % | 5.0 5.0 |
| Flexural modulus | | MPa | 8500 |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of simply supported beam without notch | | kJ/m² | 60 |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Surface Resistivity | | ohms | 1E+14 |
| Volume resistivity | | ohms·cm | 1E+15 1E+12 |
| CTI | | V | 275 -- |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | °C | 245 -- |
| | °C | 260 -- |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare