PAEK LUVOCOM® 2205-7123 VP LEHVOSS Group

Properties:
Fillers
carbon fiber reinforced materials
Usages:
Medical and nursing supplies
Compare

Technical Data Sheet

physical property	Test Method	Test Result
density	ISO 1183	1.47 g/cm³
melt mass-flow rate	ISO 1133	18 g/10min
Shrinkage rate	DIN 16901	0.10to0.40 %

Mechanical properties	Test Condition	Test Method	Test Result
bending strength		ISO 178	215 MPa
Bending Strain		ISO 178	2.3 %
Tensile strain	Yield	ISO 527-2	1.8 %
Flexural modulus		ISO 178	11000 MPa
Tensile modulus		ISO 527-2	13000 MPa
tensile strength	Break	ISO 527-2	145 MPa

Impact resistance	Test Condition	Test Method	Test Result
Charpy Notched Impact Strength		ISO 179/1eA	6.0 kJ/m²
Impact strength of simply supported beam without notch		ISO 179/1fU	26 kJ/m²

Electrical performance	Test Condition	Test Method	Test Result
insulation resistance		IEC 60167	<1.0E+6 ohms

Thermal performance	Test Method	Test Result
vicat	ISO 306/A	280 °C
Continuous use temperature	UL 746B	220 °C
maximum service temperature		250 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top