PC/PBT 357-1001 SABIC INNOVATIVE SHANGHAI

Form：Granules

Properties:

Impact modification

Typical Applications:

Electrical fieldElectronic fieldArchitectural application fieldOutdoor applicationsElectrical appliancesEngine hood partsMedical suppliesNursing suppliesPlastic bagCastersLawn equipmentGarden equipmentHousehold goodsLiquid handlingPetroleum ApplicationsNatural gas suppliesIndustrial applicationsSpoolShellswitch

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Electrical field \| Electronic field \| Architectural application field \| Outdoor applications \| Electrical appliances \| Engine hood parts \| Medical supplies \| Nursing supplies \| Plastic bag \| Casters \| Lawn equipment \| Garden equipment \| Household goods \| Liquid handling \| Petroleum Applications \| Natural gas supplies \| Industrial applications \| Spool \| Shell \| switch
Properties:	Impact modification

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Charpy Notched Impact Strength	23°C	ISO 179/1eA	45	kJ/m²
Impact strength of cantilever beam gap	-30°C	ASTM D256	150	J/m
	Impact strength of cantilever beam gap	23°C	ASTM D256	320	J/m
		Impact strength of cantilever beam gap	-30°C	ISO 180/1A	10	kJ/m²
			Impact strength of cantilever beam gap	23°C	ISO 180/1A	45	kJ/m²
			Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	23°C	ASTM D4812	NoBreak
Dart impact	23°C,TotalEnergy	ASTM D3763	35.8	J
	Dart impact	23°C	ASTM D3029	43.4	J
	Dart impact	Dart impact	23°C11	ASTM D3029	43.0	J
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	0.46mm	UL 94	HB
	UL flame retardant rating	0.63mm	UL 94	V-0
	UL flame retardant rating	UL flame retardant rating	3.0mm	UL 94	5VA
Burning wire flammability index	1.0mm	IEC 60695-2-12	960	°C
Hot filament ignition temperature	1.0mm	IEC 60695-2-13	775	°C
	Hot filament ignition temperature	2.0mm	IEC 60695-2-13	750	°C
	Hot filament ignition temperature	Hot filament ignition temperature	3.0mm	IEC 60695-2-13	725	°C
Extreme Oxygen Index		ASTM D2863	30	%
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength	Break	ISO 527-2/50	40.0	Mpa
Tensile strain	Yield	ASTM D638	5.0	%
	Tensile strain	Yield	ISO 527-2/50	5.0	%
		Tensile strain	Break	ASTM D638	54	%
		Tensile strain	Tensile strain	Break	ISO 527-2/50	30	%
Bending modulus	50.0mmSpan	ASTM D790	2100	Mpa
Bending modulus	Bending modulus		ISO 178	2000	Mpa
bending strength		ISO 178	73.0	Mpa
	bending strength	Yield,50.0mmSpan	ASTM D790	78.0	Mpa
	bending strength	bending strength	Break,50.0mmSpan	ASTM D790	78.0	Mpa
Tensile modulus		ASTM D638	2020	Mpa
Tensile modulus	Tensile modulus		ISO 527-2/1	2200	Mpa
tensile strength	Yield	ASTM D638	48.0	Mpa
	tensile strength	Yield	ISO 527-2/50	50.0	Mpa
	tensile strength	tensile strength	Break	ASTM D638	42.0	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45MPa,Unannealed,3.20mm	ASTM D648	135	°C
	Hot deformation temperature	0.45MPa,Unannealed,6.40mm	ASTM D648	138	°C
		Hot deformation temperature	1.8MPa,Unannealed,3.20mm	ASTM D648	98.0	°C
			Hot deformation temperature	1.8MPa,Unannealed,6.40mm	ASTM D648	99.0	°C
			Hot deformation temperature	Hot deformation temperature	1.8MPa,Unannealed,64.0mmSpan	ISO 75-2/Af	84.0	°C
Vicat softening temperature		ASTM D152513	134	°C
	Vicat softening temperature	--	ISO 306/B50	145	°C
	Vicat softening temperature	Vicat softening temperature	--	ISO 306/B120	150	°C
Ball Pressure Test	125°C	IEC 60695-10-2	Pass
Linear coefficient of thermal expansion	MD：-40to40°C	ASTME831	9.2E-05	cm/cm/°C
	Linear coefficient of thermal expansion	MD：60to138°C	ASTME831	1.2E-04	cm/cm/°C
		Linear coefficient of thermal expansion	MD：-40to40°C	ISO 11359-2	7.2E-05	cm/cm/°C
			Linear coefficient of thermal expansion	TD：-40to40°C	ASTME831	8.4E-05	cm/cm/°C
			Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	TD：-40to40°C	ISO 11359-2	8.4E-05	cm/cm/°C
RTI Elec		UL 746	120	°C
RTI Imp		UL 746	120	°C
RTI Str		UL 746	140	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate	TD：--3	Internal Method	1.2-1.6	%
Water absorption rate	24hr	ASTM D570	0.080	%
	Water absorption rate	Saturation,23°C	ISO 62	0.50	%
	Water absorption rate	Water absorption rate	Equilibrium,23°C,50%RH	ISO 62	0.15	%
Outdoor applicability		UL 746C	f2
density		ASTM D792	1.35	g/cm³
Specific volume		ASTM D792	0.740	cm³/g
density		ISO 1183	1.34	g/cm³
melt mass-flow rate	250°C/5.0kg	ASTM D1238	9.6	g/10min
Melt Volume Flow Rate (MVR)	250°C/5.0kg	ISO 1133	8.00	cm3/10min
Shrinkage rate	MD：--2	Internal Method	0.80-1.1	%
	Shrinkage rate	MD：--3	Internal Method	1.0-1.4	%
		Shrinkage rate	MD：3.20mm	Internal Method	1.0-1.4	%
		Shrinkage rate	Shrinkage rate	TD：--2	Internal Method	0.90-1.3	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Volume resistivity		ASTM D257	>1.2E+16	ohms·cm
Dielectric strength	1.60mm,in Oil	ASTM D149	25	KV/mm
	Dielectric strength	3.20mm,inAir	ASTM D149	19	KV/mm
	Dielectric strength	Dielectric strength	3.20mm,in Oil	ASTM D149	19	KV/mm
Dielectric constant	100Hz	ASTM D150	3.20
Dielectric constant	Dielectric constant	1MHz	ASTM D150	3.20
Dissipation factor	100Hz	ASTM D150	3E-03
Dissipation factor	Dissipation factor	1MHz	ASTM D150	0.030
Arc resistance		ASTM D495	PLC6
Compared to the anti leakage trace index	CTI	UL 746	PLC 2
High arc combustion index	HAI	UL 746	PLC 3
High voltage arc tracing rate	HVTR	UL 746	PLC 3
Hot wire ignition	HWI	UL 746	PLC 2
hardness	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness	R-Scale	ASTM D785	117

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top