PPS

PPS DIC.PPS CZL-2000 DIC Corporation

Properties:
Filler carbon PTFE
Compare

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result
Suspended wall beam without notch impact strength		ASTM D256	200 J/m
Impact strength of cantilever beam gap		ASTM D256	45 J/m

flammability	Test Condition	Test Method	Test Result
UL flame retardant rating	0.8mm	UL 94	V-0

mechanical properties	Test Condition	Test Method	Test Result
Bending modulus		ASTM D790	8000 MPa
elongation	Break	ASTM D638	0.80 %
compressive strength		ASTM D695	120 MPa
bending strength		ASTM D790	110 MPa
tensile strength		ASTM D638	100 MPa
Tensile modulus		ASTM D638	8500 MPa
Friction coefficient	Steel - Static	ASTM D1894	0.21
Friction coefficient	Friction coefficient	Steel - Dynamic	ASTM D1894	0.21
Poisson's ratio			0.36

thermal performance	Test Condition	Test Method	Test Result
Linear coefficient of thermal expansion	TD:-30to90°C	ASTM D696	2.1E-05 cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	MD:-30to90°C	ASTM D696	2.1E-05 cm/cm/°C
Hot deformation temperature	1.8MPa,Unannealed	ASTM D648	265 °C

Physical properties	Test Condition	Test Method	Test Result
Shrinkage rate	MD	ASTM D955	0.25 %
density		ASTM D792	1.52 g/cm³
Water absorption rate	23°C,24hr	ASTM D570	0.070 %
Shrinkage rate	TD	ASTM D955	0.25 %

Electrical performance	Test Condition	Test Method	Test Result
Volume resistivity		ASTM D257	1.0E+7到1.0E+8 ohms·cm

hardness	Test Condition	Test Method	Test Result
Rockwell hardness	R-Scale	ASTM D785	118
Rockwell hardness	Rockwell hardness	M-Scale	ASTM D785	98

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top