
POM LS701 ASAHI JAPAN
116
Form:Granules | Grade:Injection grade
Properties:
wear resistantHigh mobilityLow friction coefficientLubricity
Typical Applications:
Electrical fieldElectronic fieldHousehold goodsIndustrial applications
Product Description
Certificates(1)
Datasheet
Product Description
| Typical Applications: | Electrical field | Electronic field | Household goods | Industrial applications |
| Properties: | wear resistant | High mobility | Low friction coefficient | Lubricity |
Certificates

Technical Data Sheet
| Basic Performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Water absorption rate | 24 hr | ASTM D570 | 0.2 | % |
| melt mass-flow rate | 190℃/2.16kg | ISO 1133 | 34 | g/10min |
| ASTM D1238 | 34 | g/10min | ||
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| tensile strength | ASTM D638 | 61 | MPa | |
| Tensile modulus | ISO 527-2 | 3200 | MPa | |
| Impact strength of cantilever beam gap | ASTM D256 | 49 | J/m | |
| bending strength | ASTM D790 | 98 | MPa | |
| Bending modulus | ASTM D790 | 3140 | MPa | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| UL flame retardant rating | UL 94 | HB | ||
| Linear coefficient of thermal expansion | Flow | ASTM E831 | 0.0001 | cm/cm/℃ |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Shrinkage rate | Across Flow | ISO 294-4 | 1.8-2.2 | % |
| Flow | ASTM D955 | 1.8-2.2 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.