PP Homopolymer SAXALEN™ PPH305G30
0
- Properties:Fillerglass fiber reinforced material30%filler by weight
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO1183 | 1.07 g/cm³ | |
| Melt volume flow rate | ISO1133 | 12.0 cm³/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ISO527-2/1 | 6200 MPa | |
| Tensile stress | Break | ISO527-2/5 | 85.0 MPa |
| Bending stress | ISO178 | 123 MPa | |
| Tensile strain | Break | ISO527-2/5 | 3.0 % |
| Flexural modulus | ISO178 | 5200 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO179/1eA | 9.0 kJ/m² | |
| ISO179/1eA | 11 kJ/m² | ||
| Impact strength of simply supported beam without notch | ISO179/1eU | 40 kJ/m² | |
| ISO179/1eU | 50 kJ/m² | ||
| Impact strength of cantilever beam gap | ISO180/1A | 8.0 kJ/m² | |
| ISO180/1A | 10 kJ/m² | ||
| ISO180/1U | 40 kJ/m² | ||
| ISO180/1U | 44 kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| vicat | ISO306/B120 | 138 °C | |
| ISO75-2/A | 142 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top