TPV Santoprene™ 121-62M100
8
- Properties:High temperature resistanAging resistancewear resistantUV resistanceChemical resistance
- Usages:Automotive sectorElectrical fieldElectronic fieldFitness equipmentElectric wireCableHousehold appliancesHousehold appliancesCastersBottle cappackingPower/Other ToolsSoft handleCar exterior decorationApplication in the automotive fieldsporting goodsAutomotive interior equipmentOutdoor applicationsThin walled componentsParts under the hood of a carLawn and garden equipment
CompareTechnical Data Sheet
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ISO868 | 66 |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UL flame retardant rating | UL94 | HB |
| elastomer | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Compression permanent deformation 2 | ASTMD395B | 44 % | |
| Compression permanent deformation 3 | ISO815 | 33 % | |
| ISO815 | 44 % | ||
| Tensile stress transverse flow rate | ASTMD412 | 2.10 Mpa | |
| ISO37 | 2.10 Mpa | ||
| Tensile strength - transverse flow rate | ASTMD412 | 5.40 Mpa | |
| tensile strength | ISO37 | 5.40 Mpa | |
| ASTMD412 | 450 % | ||
| ISO37 | 450 % | ||
| Compression permanent deformation 2 | ASTMD395B | 33 % |
| aging | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Change rate of tensile strength in air | ASTMD573 | -14 % | |
| ISO188 | -14 % | ||
| Change rate of ultimate elongation in air | ASTMD573 | -10 % | |
| ChangeinTensileStrainBreakinAir | ISO188 | -10 % | |
| ChangeinDurometerHardnessAir | ASTMD573 | 2.0 | |
| ChangeinShoreHardnessinAir | ISO188 | 2.0 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| brittle temperature | ASTMD746 | -60.0 °C | |
| ISO812 | -60.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top