PC/ABS C6200-111 SABIC INNOVATIVE SHANGHAI

Form：Granules | Grade：Injection grade

Properties:

Flame retardantHigh mobilityHigh impact resistanceHigh temperature resistanheat-resisting Flame retardantUV stability

Typical Applications:

Electrical fieldElectronic fieldHousehold appliancesHousehold appliancesAutomotive sector

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Electrical field \| Electronic field \| Household appliances \| Household appliances \| Automotive sector
Properties:	Flame retardant \| High mobility \| High impact resistance \| High temperature resistan \| heat-resisting \| Flame retardant \| UV stability

Certificates

No Data...

Technical Data Sheet

mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap	23℃	ASTM D-256	535	J/m
tensile strength	屈伏点	ASTM D-638	67	Mpa
Bending modulus		ASTM D-790	2691	Mpa
bending strength		ASTM D-790	103	Mpa
Elongation at Break	Break点	ASTM D-638	50	%
Tensile modulus		ASTM D-638	-	Mpa
Rockwell hardness		ASTM D-785	-	R
thermal performance	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating		UL -94	1.5	UL94
Hot deformation temperature	1.8Mpa	ASTM D-648	86	°C
Long term use temperature	无冲击	UL -746B	75	°C
Vicat softening temperature		ASTM D-525	-	°C
Hot deformation temperature	0.45Mpa	ASTM D-648	-	°C
UL flame retardant rating		UL -94	V-0
Linear coefficient of thermal expansion		E831	-	1/℃
Long term use temperature	含冲击	UL -746B	65	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate	3.2mm	ASTM D-955	-	E-3
density		ASTM D-792	-
Water absorption rate		ASTM D-570	-	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dielectric constant	1MHz	ASTM D-150	-
Surface resistivity		ASTM D-257	-	ohm-cm
Dissipation factor	1MHz	ASTM D-150	-
Volume resistivity		ASTM D-257	-	ohm-cm

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top