Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Shrinkage rate | | ASTM D955 | 0.30to0.50 % |
| melt mass-flow rate | | ASTM D1238 | 23 g/10min |
| density | | ASTM D792 | 1.08 g/cm³ |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Hardness | | ASTM D3363 | H |
| Rockwell hardness | | ASTM D785 | 110 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | HB |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Flexural modulus | | ASTM D790 | 2450 MPa |
| tensile strength | | ASTM D638 | 49.0 MPa |
| bending strength | | ASTM D790 | 68.6 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTM D256 | 120 J/m |
| Impact strength of cantilever beam gap | | ASTM D256 | 150 J/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ASTM D648A | 92.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare