ABS FT3450
0
- Usages:Electrical appliancesautomotive internal parts
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO1183 | 1.06 g/cm³ | |
| melt mass-flow rate | ISO1133 | 17 g/10min | |
| Shrinkage rate | ISO294-4 | 0.40到0.70 % | |
| Water absorption rate | ISO62 | 1.0 % | |
| ISO62 | 0.22 % |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UL flame retardant rating | UL94 | HB | |
| UL94 | HB |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ISO527-2/1 | 2300 MPa | |
| Tensile stress | Yield | ISO527-2/50 | 45.0 MPa |
| ISO527-2 | 63.0 MPa | ||
| ISO527-2 | 19.0 MPa | ||
| Tensile strain | Yield | ISO527-2/50 | 2.6 % |
| ISO527-2 | 3.6 % | ||
| ISO527-2 | 2.4 % | ||
| Break | ISO527-2 | 12 % | |
| Bending stress | ISO178 | 65.0 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO179/1eA | 15 kJ/m² | |
| Impact strength of simply supported beam without notch | ISO179/1eU | 无断裂 | |
| Impact strength of cantilever beam gap | ISO180/1A | 16 kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ISO75-2/Be | 103 °C | ||
| ISO75-2/Ae | 99.0 °C | ||
| vicat | ISO306/B50 | 102 °C | |
| ISO11359-2 | 9.5E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top