Technical Data Sheet
| thermosetting | Test Condition | Test Method | Test Result |
|---|
| Hardener | | 按重量计算的混合比: 100 |
| Thermosetting mixed viscosity | | | 5000 cP |
| Resin | | 按重量计算的混合比: 17 |
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | | 1.21 g/cm³ |
| density | | | 1.52 g/cm³ |
| hardness | Test Condition | Test Method | Test Result |
|---|
| | | 52 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | | V-0 UL94 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| elongation | Break | | 57 % |
| tear strength | | | 22.8 kN/m |
| tensile strength | | | 6.89 MPa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Surface Resistivity | | | 3.5E+15 ohm |
| Volume resistivity | | | 3.1E+14 ohm·cm |
| dielectric strength | | | 21 kV/mm |
| dielectric constant | | | 3.60 |
| Dissipative factor | | | 0.025 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| thermal conductivity | | 内部方法 | 0.57 W/m/K |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare