PP Daelim Poly® EP348P
56
- Properties:Suitable for injection moEasy to processGood impact resistance
- Usages:Can be used for ice cream containersCapHousehold utensils and toy boxesFlower potetc
Compare
View PricesTechnical Data Sheet
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ISO 1133 | 70 g/10min | |
| density | ISO 1183 | 0.9 g/cm |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ball-indentation hardness | ISO 2039-1 | 50 Mpa | |
| elongation | ISO 527-1 | 30 % | |
| Impact strength of simply supported beam without notch | ISO 179 | 80 KJ/m | |
| Charpy Notched Impact Strength | ISO 179 | 3.2 KJ/m | |
| ISO 179 | 4 KJ/m | ||
| Impact strength of simply supported beam without notch | ISO 179 | 100 KJ/m | |
| ISO 179 | 110 KJ/m | ||
| Charpy Notched Impact Strength | ISO 179 | 5.5 KJ/m | |
| tensile strength | ISO 527-1 | 24 Mpa | |
| Flexural modulus | ISO 527-1 | 1200 Mpa | |
| elongation at yield | ISO 527-1 | 4 % |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| vicat | ISO 306 | 150 °C | |
| ISO 306 | 65 °C | ||
| Heat distortion temperature | ISO 75B-1 | 85 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top