Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792 | 1.33 g/cm³ |
| Water absorption rate | Equilibrium | ASTM D570 | 0.25 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | V-0 |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Suspended wall beam without notch impact strength | | ASTM D256 | 75 J/m |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ASTM D638 | 2760 MPa |
| tensile strength | Yield | ASTM D638 | 64.8 MPa |
| elongation | Yield | ASTM D638 | 4.0 % |
| Flexural modulus | | ASTM D790 | 2760 MPa |
| bending strength | | ASTM D790 | 112 MPa |
| compressive strength | | ASTM D695 | 112 MPa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Surface Resistivity | | ASTM D257 | 1.0E+6到1.0E+9 ohms |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Continuous use temperature | | | 171 °C |
| Linear coefficient of thermal expansion | | ASTM D696 | 5.2E-05 cm/cm/°C |
| Heat distortion temperature | | ASTM D648 | 199 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare