Technical Data Sheet
| 物理性能 | Test Condition | Test Method | Test Result |
|---|
| 密度 | | ASTMD792 | 1.33 g/cm³ |
| 熔体质量流动速率 | 337°C/6.6kg | ASTMD1238 | 9.5 g/10min |
| 收缩率 | MD：3.20mm | 内部方法 | 0.50to0.70 % |
| K（磨损）系数 | --2 | 内部方法 | 72.0 |
| K（磨损）系数 | --3 | 内部方法 | 27.0 |
| PVLimit4 | | 内部方法 | 1.9 MPa·m/s |
| 热性能 | Test Condition | Test Method | Test Result |
|---|
| 热变形温度 | 1.8MPa,未退火,6.40mm | ASTMD648 | 200 °C |
| RTI Elec | | UL746 | 170 °C |
| RTI Imp | | UL746 | 170 °C |
| RTI Str | | UL746 | 170 °C |
| 可燃性 | Test Condition | Test Method | Test Result |
|---|
| UL阻燃等级 | 0.38mm | UL94 | V-0 |
| UL阻燃等级 | 1.5mm | UL94 | 5VA |
| 机械性能 | Test Condition | Test Method | Test Result |
|---|
| 伸长率6 | 断裂 | ASTMD638 | 40 % |
| 弯曲模量7 | 100mmSpan | ASTMD790 | 3410 Mpa |
| FlexuralStrength7 | Yield,100mmSpan | ASTMD790 | 152 Mpa |
| 摩擦系数 | 与钢-动态 | ASTMD1894 | 0.25 |
| 泰伯耐磨性 | 1000Cycles,1000g,CS-17转轮 | ASTMD1044 | 2.00 mg |
| 拉伸模量5 | | ASTMD638 | 3360 Mpa |
| 拉伸强度6 | Yield | ASTMD638 | 103 Mpa |
| 电气性能 | Test Condition | Test Method | Test Result |
|---|
| 耐电弧性8 | | ASTMD495 | PLC6 |
| 相比耐漏电起痕指数(CTI) | CTI | UL746 | PLC 4 |
| 高电弧燃烧指数(HAI) | HAI | UL746 | PLC 0 |
| 高电压电弧起痕速率(HVTR) | HVTR | UL746 | PLC 2 |
| 热丝引燃(HWI) | HWI | UL746 | PLC 1 |
| 硬度 | Test Condition | Test Method | Test Result |
|---|
| 洛氏硬度 | M级 | ASTMD785 | 110 |
| 冲击性能 | Test Condition | Test Method | Test Result |
|---|
| 悬壁梁缺口冲击强度 | 23°C | ASTMD256 | 120 J/m |
| 悬壁梁缺口冲击强度 | 23°C | ASTMD4812 | 530 J/m |
| ReverseNotchIzodImpact | 3.20mm | ASTMD256 | 1300 J/m |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices