
PA6 Dynacom 403R Dynachem Co. Ltd.
Product Description
Certificates(0)
Datasheet
Product Description
Certificates
No Data...
Technical Data Sheet
| impact performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C,3.20mm | J/m | 37 | 49 |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| bending strength | MPa | 118 | 59.0 | |
| Bending modulus | MPa | 4450 | 1960 | |
| elongation | Break | % | 5.0 | 5.0 |
| tensile strength | MPa | 69.0 | 49.0 | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Vicat softening temperature | °C | 225 | -- | |
| Hot deformation temperature | 1.8MPa,Unannealed | °C | 150 | -- |
| 0.45MPa,Unannealed | °C | 190 | -- | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Shrinkage rate | MD2 | % | 0.70to0.80 | -- |
| density | g/cm³ | 1.40 | -- | |
| Water absorption rate | 23°C,24hr | % | 1.0 | -- |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Volume resistivity | ohms·cm | 1E+15 | 1E+12 | |
| Arc resistance | sec | 120 | -- | |
| Dielectric strength | 1.00mm | kV/mm | 20 | -- |
| hardness | Test Condition | Test Method | Test Result | Test Unit |
| Rockwell hardness | R-Scale | 120 | 105 | |
| Supplementary Information | Test Condition | Test Method | Test Result | Test Unit |
| ConditionedMoistureContent | % | 2.1 | -- |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.