PC HOPELEX PC-1100
562
- Properties:High rigiditytransparent
- Usages:Optical levelcurrency
- Certificates:RoHSFDAULSGSTDS
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Moulding shrinkage | ASTM D955 | 0.5-0.7 % | |
| Water absorption rate | ASTM D570 | 0.2 % | |
| melt mass-flow rate | ASTM D1238 | 10 g/10min | |
| density | ASTM D792 | 1.2 |
| optical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| transmittance | ASTM D1003 | 89 % | |
| Haze ratio | ASTM D1003 | ＜0.8 % | |
| refractive index | ASTM D542 | 1.585 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | ASTM D638 | 630 kg/cm | |
| elongation | ASTM D638 | 110 % | |
| bending strength | ASTM D790 | 920 kg/cm | |
| Flexural modulus | ASTM D790 | 24000 kg/cm | |
| Rockwell hardness | ASTM D785 | 77 M | |
| Notch impact strength | ASTM D256 | 87 kg.cm/cm |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Volume resistivity | ASTM D257 | 3 Ω.cm | |
| Loss factor | ASTM D150 | 2.95 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D648 | 125 °C | |
| ASTM D648 | 136 °C | ||
| linear expansion coefficient | ASTM D696 | 6-8 | |
| vicat | ASTM D1525 | 153 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top