ABS HAG7210
52
- Properties:Good flowHigh rigidityGeneral use10% glass fiber reinforce
- Usages:Camera applicationsAutomotive sector
Technical Data Sheet
Basic performance | Test Condition | Test Method | Test Result |
---|---|---|---|
melt mass-flow rate | ASTM D-1238 | 12 g/10min | |
density | ASTM D-792 | 1.11 g/cm | |
Shrinkage rate | ASTM D-955 | 0.2-0.5 % |
Mechanical properties | Test Condition | Test Method | Test Result |
---|---|---|---|
Flexural modulus | ASTM D-790 | 40000 kg/cm | |
bending strength | ASTM D-790 | 950 kg/cm | |
tensile strength | ASTM D-638 | 750 kg/cm | |
Impact strength of cantilever beam gap | ASTM D-256 | 8.0 kg·cm/cm | |
Rockwell hardness | ASTM D-785 | 110 R | |
elongation at break | ASTM D-638 | 5 % | |
Impact strength of cantilever beam gap | ASTM D-256 | 7.0 kg·cm/cm |
Thermal performance | Test Condition | Test Method | Test Result |
---|---|---|---|
Heat distortion temperature | ASTM D-648 | 96 °C | |
vicat | ASTM D-1525 | 112 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top