
PA6 6G30FL AQUAFIL ITALY
15
Form:Granules | Grade:Injection grade
Properties:
enhanceGlass fiber reinforced
Product Description
Certificates(0)
Datasheet
Product Description
| Properties: | enhance | Glass fiber reinforced |
Certificates
No Data...
Technical Data Sheet
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Rockwell hardness | R -Sale | ISO 2039-2 | 122 | |
| Tensile modulus | 23 ℃ | ISO 527-2/1 | 8500 | Mpa |
| tensile strength | Break,23 ℃ | ISO 527-2/5 | 140 | Mpa |
| Tensile strain | Break,23 ℃ | ISO 527-2/5 | 3.0 | % |
| Bending modulus | 23 ℃ | ISO 178 | 5800 | Mpa |
| Impact strength of cantilever beam gap | 23 ℃ | ISO 180/1A | 5.0 | kJ/m² |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Hot deformation temperature | 1.8MPa,Unannealed | ISO 75-2/A | 205 | °C |
| Vicat softening temperature | ISO 306/B50 | 210 | °C | |
| Melting temperature | DSC | ISO 3146 | 220 | °C |
| Obstructive level | 0.800mm | UL 94 | HB | |
| Hot deformation temperature | 0.45MPa,Unannealed | ISO 75-2/B | 215 | °C |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| density | ISO 1183 | 1.36 | g/cm³ | |
| Shrinkage rate | 23 ℃ | ISO 2577 | 0.25-0.55 | % |
| Water absorption rate | Saturation,23 ℃ | ISO 62 | 6.0 | % |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Surface resistivity | IEC 60093 | 1E+13 | ohms | |
| Volume resistivity | IEC 60093 | 1E+15 | ohm.cm |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.