PAS Generic PAS - Glass Fiber
0
- Properties:Fillersglass fiber reinforced materials
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D792 | 1.44to1.59 g/cm³ | |
| Shrinkage rate | ASTM D955 | 0.10to0.61 % | |
| Water absorption rate | ASTM D570 | 0.20to0.41 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Suspended wall beam without notch impact strength | ASTM D256 | 480to540 J/m | |
| Impact strength of cantilever beam gap | ASTM D256 | 59to81 J/m |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ASTM D638 | 4340to9140 MPa | |
| tensile strength | ASTM D638 | 95.7to124 MPa | |
| elongation | ASTM D638 | 1.0to3.6 % | |
| Flexural modulus | ASTM D790 | 4120to7720 MPa | |
| bending strength | ASTM D790 | 144to173 MPa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| dielectric strength | ASTM D149 | 16to17 kV/mm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D648 | 204to213 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top