LLDPE LLF 183N
0
- Properties:High mechanical performance and good processing abilitygood toughnessexcellent puncture resistanceexcluding opening agents and smoothing agents
- Usages:Casting stretching filmfilm extrusion
CompareTechnical Data Sheet
| optical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Haze ratio | ASTM D-1003 | 4 % | |
| gloss | ASTM D-2457 | 90 |
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ASTM D-1238 | 3.0 g/10min | |
| density | ASTM D-1505 | 0.918 g/cm³ |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| elongation | ASTM D-638 | 650 % | |
| tensile breaking strength | ASTM D-882 | 30 MPa | |
| ASTM D-882 | 25 MPa | ||
| elongation at break | ASTM D-882 | 450 % | |
| ASTM D-882 | 650 % | ||
| Falling hammer impact | ASTM D-1709A | 120 g | |
| ultimate tensile strength | ASTM D-638 | 15 MPa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| vicat | ASTM D-1505 | 94 ℃ | |
| Low temperature brittleness temperature | ASTM D-746 | ＜-70 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top