PA66 527LDW USA Axiall
0
- Properties:High impact resistanceself-lubricating
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D792 | 1.07 g/cm3 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Rockwell hardness | ASTM D785 | 113 |
| Test Condition | Test Method | Test Result | |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256 | 1010 J/m | |
| Heat distortion temperature | ASTM D648 | 68.3 ℃ | |
| melting temperature | ASTM D648 | 254 ℃ | |
| UL flame retardant rating | 0.83mm | HB ℃ | |
| Shrinkage rate | ASTM D955 | 1.6 % | |
| Water absorption rate | ASTM D570 | 1.3 % | |
| tensile strength | ASTM D638 | 50.7 MPa | |
| elongation | ASTM D638 | 55 % | |
| Flexural modulus | ASTM D790 | 1710 MPa | |
| dielectric constant | ASTM D150 | 2.9 |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Volume resistivity | ASTM D257 | 1E+14 ohm.cm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D648 | 213 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top