Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Water absorption rate | | ISO62 | 0.20 % |
| density | | ISO1183 | 1.19 g/cm³ |
| melt mass-flow rate | | ISO1133 | 18 g/10min |
| Melt volume flow rate | | ISO1133 | 17.5 cm3/10min |
| Shrinkage rate | | ISO294-4 | 1.4 % |
| Shrinkage rate | | ISO294-4 | 1.4 % |
| Water absorption rate | | ISO62 | 0.60 % |
| Water absorption rate | | ISO62 | 0.60 % |
| MediumDensity | | | 1.04 g/cm³ |
| SpecificHeatCapacity of Melt | | | 2110 J/kg/°C |
| ThermalConductivityofMelt | | | 0.19 W/m/K |
| hardness | Test Condition | Test Method | Test Result |
|---|
| | ISO868 | 55 |
| | ISO868 | 51 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| FMVSS flammability | | FMVSS302 | SE/B |
| Fogging-G-value | | ISO6452 | 1E-04 g |
| Limiting Oxygen Index | | ISO4589-2 | 21 % |
| UL flame retardant rating | | IEC60695-11-10,-20 | HB |
| UL flame retardant rating | | IEC60695-11-10,-20 | HB |
| UL flame retardant rating | | UL94 | HB |
| UL flame retardant rating | | UL94 | HB |
| Burning rate 3 | | ISO3795 | 28 mm/min |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| Odor | | VDA270 | 5.00 |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of simply supported beam without notch | | ISO179/1eU | NoBreak |
| Impact strength of simply supported beam without notch | | ISO179/1eU | NoBreak |
| Tensile impact strength | | ISO8256/1 | 270 kJ/m² |
| Charpy Notched Impact Strength | | ISO179/1eA | 30 kJ/m² |
| Charpy Notched Impact Strength | | ISO179/1eA | 150 kJ/m² |
| Charpy Notched Impact Strength | | ISO179/1eA | NoBreak |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ISO527-2 | 190 Mpa |
| Tensile stress | | ISO527-2 | 15.0 Mpa |
| Tensile stress | | ISO527-2 | 40.0 Mpa |
| Tensile stress | | ISO527-2 | 6.90 Mpa |
| Tensile stress | | ISO527-2 | 11.0 Mpa |
| Tensile stress | | ISO527-2 | 14.0 Mpa |
| Tensile strain | | ISO527-2 | 35 % |
| Tensile strain | | ISO527-2 | >300 % |
| Nominal tensile fracture strain | | ISO527-2 | 780 % |
| TensileCreepModule | | ISO899-1 | 170 Mpa |
| Tensile creep modulus | | ISO899-1 | 130 Mpa |
| Flexural modulus | | ISO178 | 200 Mpa |
| abrasion resistance | | ISO4649 | 120 mm³ |
| elastomer | Test Condition | Test Method | Test Result |
|---|
| tear strength | | ISO34-1 | 130 kN/m |
| tear strength | | ISO34-1 | 130 kN/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Surface Resistivity | | IEC60093 | >1.0E+15 ohms |
| Volume resistivity | | IEC60093 | 4E+13 ohms·cm |
| dielectric strength | | IEC60243-1 | 20 KV/mm |
| CTI | | IEC60112 | 600 V |
| Dissipation Factor | | IEC60250 | 0.038 |
| Dissipation Factor | | IEC60250 | 9E-03 |
| | IEC60250 | 4.60 |
| | IEC60250 | 4.90 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ISO75-2/B | 65.0 °C |
| | ISO75-2/A | 45.0 °C |
| brittle temperature | | ISO974 | -98.0 °C |
| Glass transition temperature 2 | | ISO11357-2 | -20.0 °C |
| vicat | | ISO306/A50 | 180 °C |
| vicat | | ISO306/B50 | 75.0 °C |
| melting temperature | | ISO11357-3 | 203 °C |
| | ISO11359-2 | 2E-04 cm/cm/°C |
| | ISO11359-2 | 1.8E-04 cm/cm/°C |
| | ISO11359-2 | 2E-04 cm/cm/°C |
| | ISO11359-2 | 1.7E-04 cm/cm/°C |
| | ISO11359-2 | 9E-08 m²/s |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices