ABS 3010
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | ASTM D-955 | 0.50 % | |
| Water absorption rate | ASTM D-570 | 0.28 % | |
| density | ASTM D-792 | 1.10 g/cm3 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | ASTM D-638 | 50.3 MPa | |
| elongation at break | ASTM D-638 | 4.0 % | |
| Flexural modulus | ASTM D-790 | 3100 MPa | |
| bending strength | ASTM D-790 | 89.6 MPa | |
| Impact strength of cantilever beam gap | ASTM D-256 | 58.7 J/m | |
| Suspended wall beam without notch impact strength | ASTM D-256 | 240 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Surface Resistivity | ASTM D-257 | 1.0E+4to1.0E+6 ohms | |
| Volume resistivity | ASTM D-257 | 1.0E+4to1.0E+6 Ohm.cm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Linear coefficient of thermal expansion | ASTM D-696 | 0.000085 cm/cm/℃ | |
| UL flame retardant rating | UL 94 | HB | |
| Heat distortion temperature | ASTM D-648 | 102 ℃ | |
| ASTM D-648 | 96.1 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top