Technical Data Sheet
physical property | Test Condition | Test Method | Test Result |
---|---|---|---|
density | ASTM D792 | 1.38 g/cm³ | |
filler content | 40 % |
Mechanical properties | Test Condition | Test Method | Test Result |
---|---|---|---|
tensile strength | ASTM D638 | 262 MPa | |
elongation at break | ASTM D638 | 1.0-2.0 % | |
Tensile modulus | ASTM D638 | 28966 MPa | |
bending strength | ASTM D790 | 428 MPa | |
Flexural modulus | ASTM D790 | 28276 MPa | |
Impact strength of cantilever beam gap | ASTM D256 | 294 J/m | |
Suspended wall beam without notch impact strength | ASTM D256 | 11214 J/m |
Other performance | Test Condition | Test Method | Test Result |
---|---|---|---|
injection speed | 50.8-76.2 mm/s | ||
buffer | 0.635 cm | ||
screw speed | 30-50 rpm |
Thermal performance | Test Condition | Test Method | Test Result |
---|---|---|---|
Heat distortion temperature | ASTM D648 | 113 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top