Polyolefin, Unspecified FRAGOM G/459 20 CROSSPOLIMERI ITALY

Product Description

Certificates(0)

Datasheet

Product Description

Certificates

No Data...

Technical Data Sheet

flammability	Test Condition	Test Method	Test Result	Test Unit
Temperature index (combustion)		NES715	>300
HalogenContent		IEC 60754-1	<1	%
Extreme Oxygen Index		ASTM D2863	30	%
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile strain	Break	IEC 60811	160	%
tensile strength	Yield	IEC 60811	11.0	MPa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
thermosetting	200°C	IEC 60811	60	%
thermosetting	thermosetting	ResidualValue:200°C	IEC 60811	10	%
Physical properties	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	190°C/21.6kg	ASTM D1238	4.0to9.0	g/10min
density		ASTM D792	1.44	g/cm³
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
conductivity		IEC 60754-2	<5.00	µS/mm
Dielectric constant	50Hz	ASTM D150	4.60
Volume resistivity		BS6622	4E+14	ohms·cm
hardness	Test Condition	Test Method	Test Result	Test Unit
Shore hardness	ShoreD	ASTM D2240	48
aging	Test Condition	Test Method	Test Result	Test Unit
Tensile stress change rate	135°C,168hr，Break	IEC 60811	-15	%
Change rate of tensile strength in air	135°C,168hr	IEC 60811	15	%
Supplementary Information	Test Condition	Test Method	Test Result	Test Unit
Operating		BS7655	90	°C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top