PC Makrolon® 2405

Properties:
Low viscosity
Usages:
Industrial applications
Electrical field
Electronic field
Automotive sector
currency
currency
Certificates:
UL
Compare
View Prices

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result
Shrinkage rate		ISO294-4	0.70 %
Shrinkage rate	Shrinkage rate		ISO294-4	0.65 %
Water absorption rate		ISO62	0.30 %
Water absorption rate	Water absorption rate		ISO62	0.12 %
density		ISO1183	1.20 g/cm³
Apparent density 2		ISO60	0.66 g/cm³
melt mass-flow rate		ISO1133	20 g/10min
Melt volume flow rate		ISO1133	19.0 cm3/10min
Shrinkage rate		ISO2577	0.50to0.70 %
Shrinkage rate	Shrinkage rate		ISO2577	0.50to0.70 %

hardness	Test Condition	Test Method	Test Result
		ISO2039-1	115 Mpa

optical performance	Test Condition	Test Method	Test Result
Refractive Index11		ISO489	1.585
transmissivity		ISO13468-2	89.0 %
	transmissivity		ISO13468-2	89.0 %
		transmissivity		ISO13468-2	88.0 %
		transmissivity	transmissivity		ISO13468-2	87.0 %
Haze ratio		ISO14782	<0.80 %

flammability	Test Condition	Test Method	Test Result
needle flame test		IEC60695-11-5	1.0 min
	needle flame test		IEC60695-11-5	2.0 min
		needle flame test		IEC60695-11-5	2.0 min
			needle flame test		IEC60695-11-5	0.1 min
				needle flame test		IEC60695-11-5	0.1 min
				needle flame test	needle flame test		IEC60695-11-5	0.2 min
SelfIgnitionTemperature		ASTMD1929	550 °C
UL flame retardant rating		UL94	HB
	UL flame retardant rating		UL94	V-2
	UL flame retardant rating	UL flame retardant rating		UL94	V-2
Burning wire flammability index		IEC60695-2-12	850 °C
	Burning wire flammability index		IEC60695-2-12	875 °C
	Burning wire flammability index	Burning wire flammability index		IEC60695-2-12	930 °C
Hot filament ignition temperature		IEC60695-2-13	875 °C
	Hot filament ignition temperature		IEC60695-2-13	875 °C
		Hot filament ignition temperature		IEC60695-2-13	875 °C
		Hot filament ignition temperature	Hot filament ignition temperature		IEC60695-2-13	875 °C
Extreme Oxygen Index 10		ISO4589-2	27 %
ApplicationofFlamefromSmallBurner-Method		DIN53438-1,-3	K1,F1
		ISO3795	passed
FlashIgnitionTemperature		ASTMD1929	480 °C

Supplementary Information	Test Condition	Test Method	Test Result
ElectrolyticalCorrosion		IEC60426	A1

Mechanical properties	Test Condition	Test Method	Test Result
Tensile modulus		ISO527-2/1	2400 Mpa
Tensile stress		ISO527-2/50	65.0 Mpa
Tensile stress	Tensile stress		ISO527-2/50	65.0 Mpa
Tensile strain		ISO527-2/50	6.0 %
Tensile strain	Tensile strain		ISO527-2/50	130 %
Nominal tensile fracture strain		ISO527-2/50	>50 %
TensileCreepModule		ISO899-1	2200 Mpa
Tensile creep modulus		ISO899-1	1900 Mpa
Flexural modulus		ISO178	2350 Mpa
Bending stress		ISO178	73.0 Mpa
Bending stress	Bending stress		ISO178	97.0 Mpa
		ISO178	7.1 %

Impact resistance	Test Condition	Test Method	Test Result
Impact strength of simply supported beam gap 6		ISO7391	14 kJ/m²
Impact strength of simply supported beam gap 6	Impact strength of simply supported beam gap 6		ISO7391	65 kJ/m²
Impact strength of simply supported beam without notch		ISO179/1eU	NoBreak
	Impact strength of simply supported beam without notch		ISO179/1eU	NoBreak
	Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch		ISO179/1eU	NoBreak
Suspended wall beam gap impact strength 7		ISO7391	15 kJ/m²
Suspended wall beam gap impact strength 7	Suspended wall beam gap impact strength 7		ISO7391	65 kJ/m²
Multi axis Instrumented Impact Energy		ISO6603-2	65.0 J
Multi axis Instrumented Impact Energy	Multi axis Instrumented Impact Energy		ISO6603-2	55.0 J
Multi axis Instrumented Peak Impact Force		ISO6603-2	6000 N
Multi axis Instrumented Peak Impact Force	Multi axis Instrumented Peak Impact Force		ISO6603-2	5100 N

film	Test Condition	Test Method	Test Result
WaterVaporTransmission Rate		ISO15106-1	15 g/m²/24hr
GasPermeation		ISO2556	18900 cm³/m²/bar/24hr
	GasPermeation		ISO2556	4000 cm³/m²/bar/24hr
		GasPermeation		ISO2556	630 cm³/m²/bar/24hr
			GasPermeation		ISO2556	130 cm³/m²/bar/24hr
				GasPermeation		ISO2556	3150 cm³/m²/bar/24hr
				GasPermeation	GasPermeation		ISO2556	700 cm³/m²/bar/24hr

Electrical performance	Test Condition	Test Method	Test Result
		IEC60250	3.10
			IEC60250	3.00
Dissipation Factor		IEC60250	5E-04
Dissipation Factor	Dissipation Factor		IEC60250	9E-03
CTI		IEC60112	250 V
CTI	CTI		IEC60112	125 V
Surface Resistivity		IEC60093	1E+16 ohms
Volume resistivity		IEC60093	1E+16 ohms·cm
dielectric strength		IEC60243-1	34 KV/mm

Thermal performance	Test Condition	Test Method	Test Result
BallPressure Test		IEC60695-10-2	Pass
		ISO11359-2	6.5E-05 cm/cm/°C
			ISO11359-2	6.5E-05 cm/cm/°C
Thermal conductivity coefficient 9		ISO8302	0.20 W/m/K
RTI Elec		UL746	125 °C
RTI Imp		UL746	115 °C
RTI Str		UL746	125 °C
		ISO75-2/B	137 °C
			ISO75-2/A	124 °C
Glass transition temperature 8		ISO11357-2	144 °C
vicat		ISO306/B50	145 °C
vicat	vicat		ISO306/B120	146 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

PC Makrolon® 2405

Technical Data Sheet

You May Like