Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 1.80到1.85 g/cm³ |
| Tightening rate | | ASTMD1895 | 1.0 |
| Shrinkage rate | | ASTMD955 | 0.050到0.30 % |
| Water absorption rate | | ASTMD570 | 0.13 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Barcol Hardness | | ASTMD2583 | 35到45 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | V-0 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| shear strength | | ASTMD732 | 55.2到62.1 MPa |
| Flexural modulus | | ASTMD790 | 10300到12400 MPa |
| bending strength | | ASTMD790 | 110到124 MPa |
| Compression Modulus | | ASTMD695 | 331000到359000 MPa |
| compressive strength | | ASTMD695 | 124到145 MPa |
| tensile strength | | ASTMD638 | 41.4到51.7 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTMD256 | 270到370 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| dielectric strength | | ASTMD149 | >14 kV/mm |
| arc resistance | | ASTMD495 | >185 sec |
| Inclined-PlaneTracking | | ASTMD2303 | >1000 min |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ASTMD648 | >260 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare