PP Prime PP PO 500 Primex Plastics Corporation

Compare

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result
Impact strength of cantilever beam gap	-40°C	ASTM D256	无断裂
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	23°C	ASTM D256	无断裂

mechanical properties	Test Condition	Test Method	Test Result
elongation	Break	ASTM D638	280 %
Bending modulus		ASTM D790	1240 MPa

thermal performance	Test Condition	Test Method	Test Result
Hot deformation temperature	0.45MPa,Unannealed	ASTM D648	70.6 °C
Hot deformation temperature	Hot deformation temperature	0.45MPa,Annealed	ASTM D648	91.7 °C
Linear coefficient of thermal expansion	MD	ASTM D696	1.4E-05 cm/cm/°C

Physical properties	Test Condition	Test Method	Test Result
density		ASTM D792	0.918 g/cm³
melt mass-flow rate	230°C/2.16kg	ASTM D1238	0.35 g/10min
Shrinkage rate	MD	ASTM D955	1.2to1.8 %

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top