PA66 LUVOCOM® 1-7332/GY LEHVOSS Group

Properties:

Filler carbon fiber reinforced material

Typical Applications:

Engineering accessories textile applications camshafts automotive applications business equipment gears

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Engineering accessories \| textile applications \| camshafts \| automotive applications \| business equipment \| gears
Properties:	Filler \| carbon fiber reinforced material

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	35	kJ/m²
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Bending strain		ISO 178	2.5	%
bending strength		ISO 178	255	MPa
Bending modulus		ISO 178	10000	MPa
Tensile strain	Yield	ISO 527-2	2.0	%
tensile strength	Break	ISO 527-2	180	MPa
Tensile modulus		ISO 527-2	12000	MPa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Continuous use temperature		UL 746B	120	°C
Vicat softening temperature		ISO 306/A	250	°C
Maximum operating temperature	ShortTerm		160	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	23°C,24hr		<1.0	%
Shrinkage rate		DIN 16901	0.20to0.40	%
density		ISO 1183	1.25	g/cm³
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
insulation resistance		IEC 60167	1E+06	ohms
Surface resistivity		IEC 60093	1E+04	ohms

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top