ABS Rotec® ABS SE 3 ROMIRA GERMANY

Product Description

Certificates(0)

Datasheet

Product Description

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	无断裂
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	90	kJ/m²
Charpy Notched Impact Strength	23°C	ISO 179/1eA	16	kJ/m²
Charpy Notched Impact Strength	Charpy Notched Impact Strength	-30°C	ISO 179/1eA	6.0	kJ/m²
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	1.5mm	UL 94	HB
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
bending strength	23°C	ISO 178	72.0	MPa
Bending modulus	23°C	ISO 178	2450	MPa
Tensile strain	Break,23°C	ISO 527-2/50	15	%
tensile strength	23°C	ISO 527-2/50	46.0	MPa
Tensile modulus	23°C	ISO 527-2/1	2400	MPa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
thermal conductivity		DIN 52612	0.18	W/m/K
Linear coefficient of thermal expansion	MD：23to55°C	ISO 11359-2	9E-05	cm/cm/°C
Vicat softening temperature		ISO 306/B50	101	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density	23°C	ISO 1183	1.04	g/cm³
Water absorption rate	23°C,24hr	ISO 62	0.30	%
Shrinkage rate	23°C	ISO 294-4	0.50	%
melt mass-flow rate	220°C/10.0kg	ISO 1133	15	g/10min

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top