ABS 130NP TECHNO JAPAN

Form：Granules | Grade：Injection grade

Properties:

Good impact resistanceHigh rigidityGood impact resistanceHigh rigidity

Typical Applications:

Fixed SuppliesToyFixed SuppliesToy

Supplier(0)

Product Description

Certificates(1)

Datasheet

Product Description

Typical Applications:	Fixed Supplies \| Toy \| Fixed Supplies \| Toy
Properties:	Good impact resistance \| High rigidity \| Good impact resistance \| High rigidity

Certificates

Technical Data Sheet

Basic Performance	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	220℃/10.0kg	ISO 1133	18	g/10min
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile stress	Yield	ASTM D-638	49.0	Mpa
Bending modulus		ASTM D-790	2750	Mpa
bending strength		ASTM D-790	88.3	Mpa
Impact strength of cantilever beam gap		ASTM D-256	196	J/m
Rockwell hardness		ASTM D-785	112	R scale
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45MPa，Unannealed	ASTM D-648	91.0	°C
Combustibility		UL 94	HB
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ASTM D-792	1.05	g/cm³
Shrinkage rate		ISO 294-4	0.40-0.60	%

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top